Certificate of Appreciation from General Dynamics

By | Press Releases | No Comments

Grants Pass, OR – April 15, 2015

ESAM, Inc. has received a Certificate of Appreciation from General Dynamics Mission Systems for its outstanding performance on the Prophet Enhanced Program. The announcement was made by Dave Matheny, President.

To support a critical delivery on this U. S. Army program, ESAM had to make the “impossible” happen. Faced with minimal lead time, there were major challenges with parts deliveries that affected the build schedule, both of which had to be expedited.  Mr. Matheny said, “We took a project that would normally have a lead time of up to 22 weeks, and compressed it into about 7 weeks. Our team did an awesome job, especially considering that it included 90 different assemblies.”

ESAM, a build-to-print contract manufacturer to the Aerospace and Defense market, has an AS9100C:2009 certified quality system. The company is certified as located in a HUBZone. For additional information contact Jim Anderson, Sr. Director of Sales & Marketing, at janderson@esam.com.

ESAM Inc. Selected to Receive the Northrop Grumman Corporation 2012 World Class Team Supplier Award

By | Press Releases | No Comments

These awards recognize our small business suppliers for their outstanding efforts and continued contributions in support of our many corporate initiatives, including service-disabled veterans, mentor-protégé, historically black colleges and universities, and the Ability One program,” said Karen Williams, Vice President, corporate contracts, pricing and supply chain. “The innovation and creativity of our suppliers allow Northrop Grumman to deliver the highest quality products and services to our customers.”
David Matheny (center) accepting award on December 5, 2012

David Matheny (center) accepting award on December 5, 2012

World Class Team awards recognize suppliers and employees who have demonstrated exceptional support and commitment to the SEBP goals and objectives, utilizing such criteria as product/service/quality/record; demonstrated delivery performance; outstanding program support; superior technical achievement; cost performance/competitiveness and/or continuous process improvement, among others.

David Matheny, of ESAM Inc. announced that his company received a Northrop Grumman Corporation 2012 World Class Team Supplier Award. This award is presented to those small business suppliers who have consistently demonstrated outstanding achievements and support of Northrop Grumman programs. The award was presented to Mr. Matheny at the Northrop Grumman Corporation Annual Corporate Socio-Economic Business Programs Recognition Awards Luncheon on Wednesday, December 5, 2012, at the Fairview Park Marriott Hotel in Falls Church, Virginia.

ESAM Inc. Selected to Receive a General Atomics Supplier Performance Award

By | Press Releases | No Comments

On July 31, 2014 David Matheny, President and Shareholder of ESAM Inc. accepted an award that the company received from General Atomics. This award was in recognition of outstanding performance and maintaining the rating of “Outstanding Supplier” in the third and fourth quarters of 2012.

ESAM, founded in 1974, is a high reliability supplier of Electronic Manufacturing Services. The company provides build-to-print manufacturing services of wire/cable assemblies and harnesses; electronic, electro-mechanical and electro-pneumatic complete instruments and equipment. DFM, DFT, cost reduction and reverse engineering are sub-assemblies; along with among the engineering services ESAM also offers to their customers. The company specializes in medical device, military, aerospace, capital equipment, green energy and instrumentation applications. Consistent on time delivery of high quality product at competitive prices are part of the value ESAM brings to their customers. Continual improvement is not just a slogan, but a way of life at ESAM.

AS9100C Certification

By | Press Releases | No Comments

Grants Pass, OR – August 15, 2014

ESAM Inc. has achieved AS9100C certification. AS9100C fully incorporates the requirements of the ISO 9001:2008 certification. ESAM has been ISO certified since 2004. AS9100C adds additional requirements specific to quality and safety for aerospace and defense manufacturing. The rigorous audit process included a full on-site audit by Perry Johnson, an accredited registrar, to ensure that working practices observe the procedures and stated objectives and that appropriate records are kept.

“Achieving AS9100C certification recognizes our commitment to the aerospace and defense community, along with other market segments such as medical devices, transportation, energy and others, in bringing their products to market,” said Dave Matheny, President and Shareholder of ESAM. “These markets are major segments of ESAM where we provide our build-to-print manufacturing services to some of the most prestigious companies in the USA.”

ESAM, founded in 1974, is a high reliability supplier of Electronic Manufacturing Services. The company provides build-to-print manufacturing services of wire/cable assemblies and harnesses; electronic, electro-mechanical and electro-pneumatic sub-assemblies; along with complete instruments and equipment. DFM, DFT, cost reduction and reverse engineering are among the engineering services ESAM also offers to their customers. The company specializes in medical device, military, aerospace, capital equipment, green energy, transportation and instrumentation applications. Consistent on time delivery of high quality product at competitive prices are part of the value ESAM brings to their customers. Continual improvement is not just a slogan, but a way of life at ESAM.